System
600
100W HF SSB Transceiver
The multi-purpose
System 600 HF SSB radio is designed to fulfill Long-haul Land Mobile communication
requirements. Though many radios can be adapted for more than one application,
the System 600 is well-suited as a mobile or base station. Since the System
600 was envisioned as a multi-purpose radio from the beginning, the technology,
engineering and manufacturing is the foundation of solid, functional design.
For military dispatches from remote outposts, staying in touch from an
offshore drilling rig or lonely forestry lockout, and as a governmental
emergency backup system, the multi-purpose System 600 is indispensable.
| •
Frequency Range : |
•
RX : 50 kHz - 30 MHz |
| 0 |
•
TX: 1.8 - 30 MHz |
| •
100 Watt RF Power Output |
| •
Backlit Alphanumeric Display |
|
• Unique Selective Calling Protocol |
|
• Dual Watch |
| •
MIL-STD 810 D/E 3 Year Warranty |
|
SPECIFICATIONS
|
| 0 |
| General
Specifications |
System
600 HF Single Sideband |
| Number
of Channels |
100
Channels |
| Frequency
Range |
| Receive |
50
kHz-30 MHz |
| Transmit |
1.8-30
MHz |
| Frequency
Synthesizer Step Resolution |
10 Hz, 100 Hz, 1 kHz |
| Emission
Modes |
J3E
(USB, LSB); A1A (CW); A3E (AM); H3E (2182 Mode only); J2B (USB, LSB) |
| Current
Consumption |
| Receive
(No Signal) |
1.2
A |
| Transmit |
20
A |
| Ambient
Temperature Range |
-10°C
to +50°C |
| Frequency
Stability |
±
10 ppm |
| RF
Input-Output Impedance |
50
ohms |
| Power
Supply Voltage |
13.8
VDC |
| Dimensions
(H x W x D) |
4.1"
x 9.6" x 11.3" (104 x 244 x 286 mm) |
| Weight |
9.9
lb. (4.5 kg) |
| 0 |
| Receiver
Specifications |
Measurements
made per EIA standard |
| Circuit
Type |
Double
Conversion Superheterodyne |
| Sensitivity
(10 dB S/N) |
| 0.5-1.8
MHz : J2B/J3E/A1A |
2
µV |
| 0.5-1.8
MHz : A3E |
8
µV |
| 1.8-30
MHz : J2B/J3E/A1A |
0.25
µV |
| 1.8-30
MHz : A3E |
1
µV |
| Adjacent
Channel Selectivity (-6/-60 dB) |
|
| J2B/J3E/A3E-Narrow |
2.2
/ 5 kHz |
| H3E
Narrow/A1A-Wide |
2.2
/ 5 kHz |
| A1A
Narrow |
500
Hz / 1.2 kHz |
| A3E |
6
kHz / 12 kHz |
| Clarifier
Range |
±
300 Hz |
| Image
Rejection (1.8-30 MHz) |
70
dB |
| IF
Rejection (1.8-30 MHz) |
60
dB |
| Conducted
Radiation |
-55
dBm |
| Spurious
Response |
<1
mV (Except 5.2428 MHz, 8.2150 MHz, 10.4857 MHz, and 19.6610 MHz) |
| Audio
Output |
1.5
Watt into 4 ohms w / <5% THD |
| 0 |
| Transmitter
Specifications |
Measurements
made per EIA standard |
| Power
Output |
| J2B,
J3E, A1A |
100
Watts |
| A3E,
H3E |
25
Watt AM Carrier |
| Modulation
Type |
| SSB |
Balanced
Modulator, Filtered Carrier |
| AM |
Low-Level
(Early Stage) |
| Spurious
Radiation |
-40
dB |
| SSB
Carrier Supression |
-40
dB |
| Undesired
Sideband Supression |
50
dB @ 1.5 kHz Modulation Input |
| Spurious
Response |
-40
dB |
| SSB
Audio Response |
<-6
dB from 400-2600 Hz |
| Occupied
Bandwidth |
| A1A |
<
0.5 kHz |
| J2B,
J3E, H3E |
<
3.0 kHz |
| A3E |
<
6.0 kHz |
| 3rd
Order SSB IMD |
-25
dB @ 100 W PEP (14 MHz) |
| Microphone
Impedance |
600
ohms |
|
